Best Buy Field Controls 32M-MG2 32 Inch Draft Regulator for Oil, Gas, Wood, a Reviews

Field Controls 32M-MG2 32 Inch Draft Regulator for Oil, Gas, Wood, and Coal

Best Price : Check Now!!

Product by Field Controls

Best Buy B&F Oxygen Pressure Regulator 0-15 lpm -2 Check Valves-Hose Barb-DISS Reviews

Dependable Brass Construction Medical Oxygen Regulator 0-15 lpm, 2 Check Valves

Best Price : Check Now!!

Product by Allied Healthcare

Cheapest Firepower 07819111 Series250 4-80 PSIG Oxygen Gas Regulator, 7819111 Reviews

FirePower® Oxygen Gas Regulator, 4-80 PSIG-Series250 For Oxygen - 540 CGA 4-80 PSIG delivery pressure range Solid brass and stainless steel construction 2" easy-to-read gauges (PSI & kPa scales) Fabric reinforced neoprene diaphragm

• For Oxygen - 540 CGA
• 4-80 PSIG delivery pressure range
• Solid brass and stainless steel construction
• 2-Inch easy-to-read gauges (PSI and kPa scales)
• Fabric reinforced neoprene diaphragm

Best Price : Check Now!!

Product by FirePower

Model : 7819111

Best Buy WeldMark regulator LP gas 250-40-510LP medium duty No.0781-9166 Reviews

WeldMark regulator LP gas 250-40-510LP medium duty No.0781-9166 Medium to heavy duty Designed for gas distribution systems Inlet port 1/4" NPT(F) Wide range of gas services Dimensions 3" W x 6.5" H x 5" D (76.2mm x 165.1mm x 127.0mm) Weight 3lb. (1.36kg)

Best Price : Check Now!!

Best Price Marshall Gas Controls 40410-36 36" Pigtail ACME Nut, 40410-36 Reviews

The Type I ACME Pigtail features a green nylon nut that swivels on a black bushing which is heat-sensitive. Between 240° F and 300° F the bushing will melt allowing the spring-loaded module in the valve to push the brass nipple back (approximately 1/4") closing the module and stopping the flow of gas from the container. Inside the brass nipple is a flow-limiting device designed to sense excessive gas flow. If an excessive flow is sensed, the flow-limiting device shuts the flow down to a maximum of 10 SCFH. This is also referred to as the by-pass flow.

• Use on two bottle systems with two stage automatic changeover regulators or regulators with ?T? checks
• UL/CGA listed
• Meets RVIA and OEM requirements
• Has a 1/4 inch inverted flare

Best Price : Check Now!!

Product by Marshall

Model : 40410-36

Best Buy Mr. Heater Propane Low Pressure LP Regulator 1/4" Female Pipe Thread (Inlet) X 3/8" Female Pipe Thread (Outlet), PROPANE LOW PRESSURE LP REGULATOR Reviews

propane low pressure regulator w/ 1/4" female pipe thread (inlet) x 3/8" female pipe thread (outlet) use with low pressure appliances up to 200,000 BTU's

• Propane lp regulator
• 90 day warranty
• Low pressure regulator
• 200,000 BTU max flow

Best Price : Check Now!!

Product by Mr. Heater

Model : PROPANE LOW PRESSURE LP REGULATOR

Best Price Hobart 195158 Welding Kit Mig Conversion Hobart Welding Handler 125, 195158 Reviews

Easy-to-install kit upgrades the Handler 125 to weld with solid wire and mixed shielding gas. You'll be able to weld thinner metal (22 gauge) with less splatter and a cleaner bead. Kit includes: see below. U.S.A. Regulator Included: Yes, Dual-Gauge Adjustable, Hose Length (ft.): 5

• MIG Conversion Kit
• Solenoid valve and connecting leads
• Includes regulator
• 5 ft (1.5 m) gas hose

Best Price : Check Now!!

Product by Hobart

Model : 195158

Best Price R-33 Reg/8'Hose Inert Gas Regulator Kit Reviews

ESAB Welding & Cutting Products R-33 Reg/8'Hose Inert Gas Regulator Kit 21589 Flowmeter

• Durable Lexan outer tube and flow tube with easy to
  
  
  
  Best Price : Check Now!!
  
  
  
  
  
  

  

  
  
  Product by ESAB Welding & Cutting Products
  
  
  

Discount Smith High Purity Inert Gas Regulator - Series 210 Single Stage Brass Reviews

(Pictured with optional 1/4" FNPT chrome needle valve outlet) Smith(r) High Purity Inert Gas Regulator - Series 210 Single Stage Brass for Argon, Helium, Nitrogen, Krypton and Xenon gases. These high purity single stage regulators are designed to control high purity, non-corrosive gases for applications where precise control of delivery pressure is not necessary. Recommended applications are in instrument analysis, automotive emissions testing, biological laboratories and chemical process plants where brass construction is acceptable. The materials of construction will not contaminate the gas stream, and are highly resistant to inboard diffusion of atmospheric contamination. These regulators are able to withstand vacuums generated during purging operations. Features Filtered seat for added gas stream purity, and extended service life Convoluted stainless steel diaphragm for precise

Best Price : Check Now!!

Product by Smith

Best Buy 1/2 Inch Gas Pressure Regulator w/12A09 Vent Limiter - 1/2" Maxitrol W/12A09 Vent Limiter - Maxitrol 325-3L-44 Reviews

The 325 Series is a pounds to inches regulator, meeting utility specifications. The 325 Series regulator is for use on residential, commercial, and industrial applications where adequate inlet pressures are available. They are a high performance type regulator and can be used as a single stage regulator - reducing pounds pressure to normal burner pressure. They can also be used as a line regulator on equipment already fitted with an appliance regulator. The 325-3 and 325-5A models are CSA certified and widely accepted with 2 psig and 5 psig house piping systems. In fact, the entire concept (using semi-rigid copper or flexible stainless steel tubing) would not have been possible without the development of the compact 325 series regulators. The 325-7, designed especially for the growing segment of electronic ignition equipment, permits the utilization of greater capacities without sacrificing performance. All 325 Series models are also certified through DVGW to European EN 88.

Best Price : Check Now!!

Product by Maxitrol

Cheapest Hot Max 24146 2-125 PSIG Very Heavy Duty 095 Oxygen Regulator, 24146 Reviews

Hot Max Very Heavy Duty Oxygen Regulator has 2-Inch dial faces with 2-125 PSIG.

• 2-125 PSIG
• Oxygen Regulator
• 2-Inch Dial faces
• Very heavy duty

Best Price : Check Now!!

Product by HOT

Model : 24146

Discount Mr. Heater High Pressure Propane Gas Regulator with POL Fitting #F273719, F273719 Reviews

This propane high pressure regulator is soft nose P.O.L. x 1/4 female pipe thread with a 1-60 PSI range. It is most commonly used on torches, fish cookers, smokers or other other high pressure appliances.

• F273719 high pressure regulator
• Soft nose P.O.L. x 1/4" female pipe thread
• Range of 1-60 PSI
• 400,000 BTU Capacity
• UL listed

Best Price : Check Now!!

Product by Mr. Heater

Model : F273719

Discount Smith 40-15-300 Regulator Acet Reviews

***Additional delivery time may apply. Please contact Weldfabulous for inventory availability.***

Best Price : Check Now!!

Product by Smith Equipment

Best Buy SMITH JEWELRY TORCH OUTFIT - "THE LITTLE TORCH" - 23-1001D, 23-1001D Reviews

("B" hose connections fuel 9/16"-18-LH, Oxygen 9/16"-18-RH).

• Works with any fuel, gas and oxygen
• Includes 11-1101C torch
• #3-7 curved tips
• 8' (2.4m) hoses and instruction manual
• Packaged in display box as shown

Best Price : Check Now!!

Product by Smith Equipment

Model : 23-1001D

Cheapest Uniweld RHP400 400 PSI Nitrogen Regulator, RHP400 Reviews

Uniweld 400 PSI Nitrogen Regulator is designed for purging and pressure testing with high pressures. It features large T handles for easy pressure adjustment and A CGA580 inlet and quarter inch flare outlet connection. This tool also includes easy to read 2 inch gauge and is made of heavy duty brass construction. This tool which is for use with nitrogen is backed by a 2 year warranty on material and workmanship.

• Designed for nitrogen use purging and pressure testing with high pressures
• Includes easy to read 2 inch gauge and is made of heavy duty brass construction
• Backed by a 2 year warranty on material and workmanship

Best Price : Check Now!!

Product by Uniweld

Model : RHP400

Best Buy Smith High Purity Fuel Gas Regulator - Series 620 Two Stage Brass Reviews

(Pictured with optional 1/4" FNPT diaphragm outlet valve) Smith High Purity Fuel Gas Regulator - Series 620 Two Stage Brassfor Acetylene, Hydrogen, Methane, Propane and LP gas. This high purity two stage regulator is designed for non-corrosive gases requiring precise and stable delivery pressure control. These regulators provide constant outlet pressure regardless of inlet pressure fluctuations. This regulator features a unique, specially designed stainless steel diaphragm that gives maximum accuracy and provides stable regulation of delivery pressure. A nickle plated brass, diffusion resistant, packless diaphragm shut-off valve is available for flow control and to maintain system purity. Captured 1/16" FNPT vent ports are provided for both stages to allow for venting of hazardous gases in the event of a diaphragm failure. This regulator is capable of withstanding internal vacuums

Best Price : Check Now!!

Product by Smith

Best Price Hobart 770198 Regulator, Flowmeter 10-50 Cft Argon/Carbon-di-oxide, 770198 Reviews

The Hobart MIG regulator can be used for all types of MIG welding. U.S.A. Regulator Type: Mig

• Dual Filters
• 100 percent tested for dependability
• Corrosion-resistant brass

Best Price : Check Now!!

Product by Hobart

Model : 770198